Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
NOTE: If the safety belt guide cover is damaged or if it does not remain in position, install a new cover.
11. Raise the second row seat backrest.
12. Install the safety belt anchor.
1
Position the safety belt anchor.
2
Using the special tool, install the bolt.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
13. Install the C-pillar weatherstripping.
14. Install the rear door scuff plate.
1
Position the rear door scuff plate.
