Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Part 2 Of 2
Special Tool(s)
Removal
All vehicles
NOTE: When a new wheel knuckle is installed a new wheel bearing must also be installed.
1. Remove the brake shoes.
2. NOTE: If equipped, remove ABS sensor ring.
Remove the wheel hub nut.
3. Using the special tools, remove the wheel hub.
4. NOTE: This step may not be necessary if the inner wheel bearing race remains in the wheel knuckle, after removing the wheel hub.
Using the special tools press the inner wheel bearing race from the wheel hub.