Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Steering Gear: Service and Repair
Steering Gear Boot
Steering Gear Boot
Removal and Installation
1. Position the steering gear boot cover aside.
2. NOTE: The nut cannot be reused. Install a new nut.
Disconnect the steering column shaft from the flexible coupling.
1
Remove and discard the nut.
2
Disconnect the steering column shaft from the flexible coupling.
3. Remove the steering gear boot.
1
Remove the nuts.
2
Remove the steering gear boot.
4. To install, reverse the removal procedure.