Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
Band Apply Servo: Service and Repair
Overdrive Servo
Special Tool(s)
Removal
1. NOTE: Servicing the intermediate/overdrive servo in the vehicle is only recommended in the event of a leak. If servicing is required due to a
servo condition, it is necessary to remove and disassemble the transaxle to inspect the intermediate/overdrive band assembly and direct clutch for
damage.
Raise the vehicle on a hoist.
2. WARNING: The servo is under pressure. Servo and servo cover are under high spring force. Use caution when removing servo cover.
Failure to follow these instructions may result in personal injury.
Assemble the special tool.
3. Remove the splash shield.
4. Remove the transmission cooler line bracket and bolt, and position the bracket out of the way.