Escape 2WD L4-122 2.0L DOHC VIN B Zetec SFI (2003)
9. Using the special tool, check clutch disc runout. Install a new clutch disc if not within specifications.
10. NOTE: Install a new clutch release fork if any of the following conditions are present.
Inspect the clutch release fork for:
^
cracks
^
distortion
^
excessive wear on the release bearing contact surface
Installation
1. Using the special tool, position the clutch disc on the flywheel.
2. Position the clutch pressure plate on the flywheel, install the pressure plate bolts and tighten them in sequence to specification.
3. Remove the special tool.
