Escape 2WD L4-2.3L VIN Z (2005)
10. CAUTION: Failure to hold the crankshaft pulley in place while loosening the bolt can result in damage to the engine.
CAUTION: If the crankshaft sprocket diamond washer comes off with the crankshaft pulley it must be installed back onto the crankshaft.
Remove the crankshaft pulley.
^
Remove the crankshaft pulley bolt and washer.
^
Remove the crankshaft pulley.
11. CAUTION: Use care not to damage the engine front cover or the crankshaft when removing the seal.
Using the special tool, remove the crankshaft front oil seal.
12. Remove the 3 bolts and the coolant pump pulley.
13. Remove the 2 power steering pump bolts.