Escape 2WD L4-2.3L VIN Z (2005)
10. NOTE: The auxiliary climate control housing must be slightly repositioned to remove the screws. Remove the auxiliary airflow mode door
actuator screws.
^
Disconnect the rod.
^
To install, tighten to 2 Nm (18 lb-in).
11. Remove the auxiliary airflow mode door actuator
12. NOTE: The auxiliary climate control housing must be installed behind the lower portion of the D-pillar bracket. When installed correctly, the
auxiliary climate control housing bolt will go through the D-pillar bracket first, then through the housing mounting location.
NOTE: Before the D-pillar trim panel and LH quarter trim panel are installed, correct auxiliary mode door actuator operation can be verified by
carrying out the Traction Battery Control Module (TBCM) self-test while visually verifying correct actuator operation. To install, reverse the
removal procedure.
