Escape 2WD L4-2.3L VIN Z (2005)
9. Clean the O-ring seal grooves with a 30 cm (1 foot) length of natural fiber string.
-
Loop the string around the grooves and pull the string back and forth.
10. Remove any foreign material from the grooves with a lint-free cloth.
Connect
1. Install the spring lock coupling spring.
2. Lubricate the inside of the coupling with mineral oil.
3. CAUTION: Use only new, green, O-ring seals. The use of any O-ring seals other than specified may result in intermittent leakage during
vehicle operation.
Install the O-ring seals.
-
Lubricate the O-ring seals with mineral oil.
