Escape 2WD L4-2.3L VIN Z (2005)
Escape Hybrid vehicles
14. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.
All vehicles
15. Through the glove compartment opening, connect the passenger air bag module electrical connector.
16. Close the glove compartment.
17. Remove the restraint system diagnostic tool from the clockspring electrical connector at the top of the steering column.
18. Connect and install the driver air bag module electrical connector.
1
Connect the driver air bag module electrical connector.
2
Through the steering wheel access cover opening, slide the driver air bag module electrical connector onto the pin-type retainer.