Escape 2WD L4-2.3L VIN Z (2005)
10. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger side safety canopy module electrical connector.
11. Connect the passenger side safety canopy module electrical connector.
1
Connect the passenger side safety canopy module electrical connector.
2
Slide and engage the passenger side safety canopy module electrical connector locking clip.
12. Install the passenger side D-pillar trim panel.
1
Engage the D-pillar trim panel to the quarter trim panel.
2
Install the D-pillar trim panel.
3
Install the weatherstrip.
Escape and Mariner vehicles
13. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.