Escape 2WD L4-2.5L (2009)
9. Install the timing chain tensioner and the 2 bolts. Remove the paper clip to release the piston.
-
Tighten to 10 Nm (89 lb-in).
10. NOTICE: The Camshaft Alignment Plate is for camshaft alignment only. Using this tool to prevent engine rotation can result in engine
damage.
Using the flats on the camshafts to prevent camshaft rotation, tighten the bolts.
-
Tighten to 72 Nm (53 lb-ft).
11. Install the engine front cover. For additional information, refer to Engine Front Cover See: Timing Cover/Service and Repair.
