Escape 2WD L4-2.5L (2009)
4. Attach the wiring harness retainer to the cowl stud bolt.
5. Restore the module configuration. Carry out the module configuration restore steps of the Programmable Module Installation (PMI) procedure.
See: Information Bus/Testing and Inspection/Programming and Relearning
6. Reprogram the PATS. Carry out the Parameter Reset procedure. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing
and Inspection/Programming and Relearning/Passive Anti-Theft System (PATS) Parameter Reset
7. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.