Escape 2WD L4-2.5L Hybrid (2010)
5. To exit the self-diagnostic mode, turn the ACM off.
Satellite Digital Audio Receiver System (SDARS) Module Electronic Serial Number (ESN) Retrieval - Vehicles Without Navigation
1. Operate the audio system in satellite radio mode.
2. Press and hold the AUX button and preset button 1, simultaneously.
-
The satellite radio receiver ESN displays on the screen.
3. Record the satellite radio receiver ESN.
4. Turn the audio system off.
Audio Systems With Navigation
1. Turn the ACM on.
2. Operate the audio system in radio tuner (AM/FM) mode.
3. Press and hold preset buttons 3 and 6 for 3 seconds until the speaker walk test begins.
-
The display indicates each speaker as it is tested.
4. NOTE: If the speaker walk test is the only test required, this procedure can be stopped after this step, or by allowing the speaker walk test to
complete on its own.
Before the speaker walk test is complete, press the "End Test" selection.
