Escape 2WD L4-2.5L Hybrid (2010)
Hose/Line HVAC: Service and Repair
Evaporator Inlet Line
Evaporator Inlet Line - Hybrid
Removal and Installation
NOTICE: Motorcraft(R) Electric Compressor Oil only must be used as a refrigerant system lubricant for hybrid vehicles. Addition of any oil
other than Motorcraft(R) Electric Compressor Oil to the hybrid vehicle refrigerant system will damage the electric Air Conditioning (A/C)
compressor and contaminate the refrigerant system.
1. Recover the refrigerant.
2. Remove the evaporator inlet line bracket nut.
-
To install, tighten to 7 Nm (62 lb-in).
3. Remove the receiver/drier outlet fitting nut and disconnect the fitting.
-
Discard the O-ring seal and gasket seal.
-
To install, tighten to 15 Nm (133 lb-in).
4. Remove the evaporator outlet line fitting nut and disconnect the fitting.
-
Discard the O-ring seal and gasket seal.