Escape 2WD L4-2.5L Hybrid (2010)
-
Is the voltage greater than 10 volts?
Yes
GO to A4.
No
GO to A3.
-------------------------------------------------
A3 CHECK THE HORN RELAY COIL GROUND CIRCUIT FOR AN OPEN
-
Disconnect: SJB C2280b.
-
Measure the resistance between the SJB C2280b-41, circuit CRH03 (BN), harness side and the clockspring C218-1, circuit CRH03 (BN), harness
side.
-
Is the resistance less than 5 ohms?
Yes
GO to A10.
No
REPAIR circuit CRH03 (BN) for an open. REPOWER the SRS. REFER to Restraint Systems. TEST the system for normal operation.
-------------------------------------------------
A4 CHECK FOR VOLTAGE TO THE CLOCKSPRING USING THE CONNECTOR GROUND
-
Measure the voltage between the clockspring C218-1, circuit CRH03 (BN), harness side and the clockspring C218-7, circuit GD112 (BK/GN),
harness side.
-
Is the voltage greater than 10 volts?
Yes
