Escape 2WD L4-2.5L Hybrid (2010)
Throttle Body: Service and Repair
Throttle Body
Removal and Installation
1. Remove the Air Cleaner (ACL) outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
2. Disconnect the electronic throttle control electrical connector.
3. Remove the 4 bolts and the Throttle Body (TB).
-
Discard the TB gasket.
-
To install, tighten to 10 Nm (89 lb-in).
4. To install, reverse the removal procedure.
-
Install a new TB gasket.
