Escape 2WD L4-2.5L Hybrid (2010)
Torque Converter Clutch Solenoid: Service and Repair
Solenoids
Solenoids
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the retainers and the LH splash shield.
3. Remove the transmission fluid drain plug and allow the transmission fluid to drain.
4. Install the transmission fluid drain plug.
-
Tighten to 12 Nm (106 lb-in).
5. Disconnect the transaxle vehicle harness electrical connector.
