Escape 2WD L4-2.5L Hybrid (2010)
Braking Sensor/Switch: Service and Repair
Brake Pedal Angle Sensor
Removal and Installation
1. Remove the brake pedal bracket. For additional information, refer to Brake Pedal and Bracket - Hybrid See: Brakes and Traction Control/Brake
Pedal Assy/Service and Repair.
2. Remove and discard the 2 brake pedal angle sensor screws.
3. Remove the brake pedal angle sensor.
4. To install, reverse the removal procedure.
-
Install new brake pedal angle sensor screws.
5. Carry out the Multi-Calibration Routine. Follow the scan tool directions.