Escape 2WD L4-2.5L Hybrid (2010)
16. Install the LH splash shield and the retainers.
17. Fill with clean transmission fluid to the correct level.
18. If a new solenoid body is installed, the solenoid body strategy and solenoid body identification will need to be updated. For additional
Information, refer to Solenoid Body Strategy See: Transmission Control Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Solenoid Body Strategy
19. If a replacement transaxle assembly is being installed or a new solenoid body is installed, the PCM will have to be reflashed with a new solenoid
body strategy and identification data file. For additional information, refer to Solenoid Body Strategy See: Transmission Control Systems/Testing
and Inspection/Initial Inspection and Diagnostic Overview/Solenoid Body Strategy.
