Escape 2WD V6-182 3.0L VIN 1 SFI (2002)
Compressor Fitting HVAC: Service and Repair
REMOVAL
1. Remove the nuts from the A/C manifold and tube mounting bracket.
2. Disconnect the A/C manifold and tube from the suction accumulator.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
3. Remove the front bumper cover.
4. Remove the nut and disconnect the A/C manifold and tube to A/C condenser core air conditioning line (peanut) fitting.
CAUTION: Plug all ports to prevent contamination from dirt or moisture.
5. Position aside the speed control actuator assembly.