Escape 2WD V6-3.0L (2009)
Front Fender Liner: Service and Repair
Fender Splash Shield
Fender Splash Shield
Removal and Installation
1. Remove the 3 fender splash shield bolts.
-
To install, tighten to 5 Nm (44 lb-in).
2. Remove the 7 fender splash shield pin-type retainers.
3. Remove the 6 fender splash shield screws.
-
To install, tighten to 5 Nm (44 lb-in).
4. Remove the fender splash shield.
5. To install, reverse the removal procedure.