Escape 2WD V6-3.0L (2009)
-
To install, tighten to 40 Nm (30 lb-ft).
7. Remove the bolt and inboard pivot bracket.
-
To install, tighten to 50 Nm (37 lb-ft).
8. Remove the bolt and outboard pivot bracket.
-
To install, tighten to 50 Nm (37 lb-ft).
9. NOTE: Make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To assemble, reverse the disassembly procedure.
