Escape 2WD V6-3.0L (2009)
Brake Shoe: Testing and Inspection
Brake System Inspection
Brake Shoes
1. Inspect and measure the thickness of the brake shoe friction material. For additional information, refer to Specifications.
-
Minor surface cracks do not require shoe replacement, however, if there are missing chunks or cracks in the lining through to the backing plate,
install new brake shoes.
-
If the thickness of the friction material is less than the specified thickness, install new brake shoes.
-
Verify that the mounting hardware is installed correctly and operating correctly. Install new hardware as necessary.
-
Verify that the backing plate contact points are free of corrosion that may cause binding. Clean or install new as necessary.
-
Verify correct brake shoe adjustment.