Escape 2WD V6-3.0L (2009)
Disassembly and Assembly
1. Remove the passenger airbag module. For additional information, refer to Air Bag Systems.
2. Remove the Audio Control Module (ACM).
3. Remove the Instrument Cluster (IC).
4. Remove the instrument panel.
5. Remove the 4 defroster duct adapter screws and the defroster duct adapter.
6. Remove the 4 Front Display Interface Module (FDIM) screws and the FDIM.
-
Disconnect the FDIM electrical connector.
7. Remove the 2 instrument cluster opening instrument panel trim screws.
8. Remove the 4 instrument panel trim-to-audio unit bracket screws.
9. Remove the 2 instrument panel trim-to-audio unit bracket nuts.
10. Remove the 3 glove compartment screws and the glove compartment.