Escape 2WD V6-3.0L (2009)
3. Remove the lower intake manifold.
4. Disconnect the KS electrical connector.
5. Remove the bolt and the KS.
Installation
Engine block-mounted KS
1. Install the KS and the bolt.
-
Tighten to 25 Nm (18 lb-ft).
2. Connect the KS electrical connector.
3. Install the lower intake manifold.
Cylinder head-mounted KS
4. Install the KS and the bolt.
-
Tighten to 25 Nm (18 lb-ft).
5. Connect the KS electrical connector.
