Escape 2WD V6-3.0L (2009)
38. Remove the rear planetary carrier/center ring gear assembly See Figure 24.
39. Remove the low/reverse wave spring, clutch pack and pressure plate. See Figure 25.
40. Remove the low One-Way Clutch (OWC). See Figure 26.
41. NOTE: The intermediate (2, 6) clutch is removed with the rear planetary sun gear and shell assembly.
Remove the rear planetary sun gear and shell assembly and remove the intermediate (2, 6) clutch from the assembly. See Figure 27.
42. Remove the pressure plate and the wave spring.
43. Remove the No 3 thrust bearing. See Figure 28.
44. Remove the overdrive/direct clutch assembly.
45. NOTE: If the No. 1 thrust bearing is stuck to the overdrive/direct clutch assembly remove the No. 1 thrust bearing from the overdrive/direct clutch
assembly.
