Escape 2WD V6-3.0L (2009)
21. Using a suitable depth gauge, measure the distance from the top of Shim Selection Gauge # 307-300 to the leg surface of the center support Record
this as measurement B. See Figure 63.
22. Subtract measurement B from measurement A and record as measurement C.
23. Install the Shim Selection Gauge # 307-300 on the transaxle case.
24. Using a suitable depth micrometer measure the distance from the Shim Selection Gauge # 307-300 to the top of the OWC Record this as
measurement D. See Figure 64.
