Escape 2WD V6-3.0L (2009)
Transmission Speed Sensor: Service and Repair
Output Shaft Speed (OSS) Sensor
6F35
Output Shaft Speed (OSS) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the retainers and the LH splash shield.
3. Remove the transmission fluid drain plug and allow the transmission fluid to drain.
4. Install the transmission fluid drain plug.
-
Tighten to 12 Nm (106 lb-in).
5. Disconnect the transaxle electrical connector.
6. Remove the transaxle electrical wiring harness retainers from the transmission fluid pan studbolts.