Escape 2WD V6-3.0L (2009)
Tighten the 8 main control cover bolts and 5 stud bolts.
-
Tighten to 12 Nm (106 lb-in).
12. Position the transmission fluid cooler tube bracket and transmission fluid cooler tube assembly in place and install the 2 nuts.
-
Tighten to 9 Nm (80 lb-in).
13. Connect the transaxle electrical connector.
14. Connect the transaxle electrical wiring harness retainers to the transmission fluid pan studbolts.
15. Install the LH splash shield and the retainers.
