Escape 2WD V6-3.0L (2009)
Transmission Mount: Service and Repair
Transmission Insulator and Retainer - Rear
Transmission Insulator and Retainer - Rear
Transmission Insulator and Retainer - Rear
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the rear insulator through bolt.
-
To install, tighten to 115 Nm (85 lb-ft).
3. Remove the rear insulator nuts and bolt.
-
To install, tighten to 80 Nm (59 lb-ft).
