Escape 2WD V6-3.0L (2009)
Transmission Mount: Service and Repair
Manual Transmission
Transaxle Support Insulator - LH
Transaxle Support Insulator - LH
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the air cleaner.
3. Using the Engine Support Bar, support the engine.
4. Remove the 4 LH transaxle support insulator bolts.
-
To install, tighten to 48 Nm (35 lb-ft).
5. Remove the through bolt and the LH transaxle support insulator.
