Escape 2WD V6-3.0L VIN 1 (2004)
-
If equipped with power seat, connect the electrical connector.
12. If equipped with power seats, connect the battery ground cable.
13. Position the driver seat forward.
14. Install the seat track to floor nuts.
15. If equipped with power seats, disconnect the battery ground cable and wait one minute.
Vehicles with side air bag
16. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove may result in personal injury and possible violation of vehicle safety standards.
Remove the special tool from the driver side air bag module body harness electrical connector.
17. Connect the driver side air bag module electrical connector.
All vehicles