Escape 2WD V6-30L VIN 1 (2004) Fuel Tank Unit Diagrams | Component Information
6. Disconnect the electrical connectors.
7. Disconnect the fuel and vapor lines from the fuel tank.
8. WARNING: The fuel tank may be pressurized. Remove the fuel tank filler cap slowly. If a hissing sound is heard, wait until the condition
stops before removing the fuel tank filler cap. If these precautions are not followed, fuel may spray and cause personal injury.
Remove the gas cap.
9. Using the special tool, remove the fuel pump module.
INSTALLATION
1. NOTE: Install a new fuel pump mounting gasket.
To install, reverse the removal procedure.
-
Start the engine and visually inspect for leaks.