Escape 2WD V6-3.0L VIN 1 (2004)
20. Connect the transaxle harness connector, and the TR sensor connector.
21. Install the intake tube and air cleaner cover.
22. Connect the breather tube and mass air flow (MAF) sensor.
23. NOTE: Before installing the battery tray check the vent tube hose for any obstructions, kinks, or incorrect routing position.
Install the battery tray and battery.
24. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms can occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 160 km (100 miles) or more to relearn the strategy.
Connect the battery cables.
25. Check the transmission fluid, add fluid as necessary.
26. Start the engine and move the transaxle range selector lever through all gear positions. Refill as necessary.
27. Make sure the vehicle will only start in PARK, and then in NEUTRAL. Verify that the backup lamps illuminate in the REVERSE position.