Escape 4WD L4-2.3L VIN H Hybrid (2005)
4. Select appropriate wire splice for the wires to be spliced
5. Identify the appropriate crimping chamber on the Rotunda 164-R5901 Pro - Crimper by matching the wire size on the dies with the wire size
stamped on the butt splice.
Note: Rotunda 164 - R5901 Pro - Crimper is the only tool that can be used with these splices.
6. Center one end of the wire spice in the appropriate crimping chamber.
7. Insert stripped wire into the barrel.
8. Holding the wire in place, squeeze tool handles until ratchet releases.
9. Repeating steps 5-7, crimp the other half of the splice.