Escape 4WD L4-2.3L VIN H Hybrid (2005)
3. Squeeze the tabs and remove the accelerator cable from the bracket.
4. Remove the nuts and the accelerator cable-to-valve cover stud brackets.
-
To install, tighten to 10 Nm (89 lb-in).
5. Remove the accelerator cable grommet from the dash panel.
6. Remove the accelerator cable from the rubber plunger.
7. Position the plunger rearward and remove the cable from the accelerator pedal.
-
Remove the accelerator cable.
8. To install, reverse the removal procedure.
