Escape 4WD L4-2.5L (2010)
Console: Service and Repair
Console - Floor
Removal and Installation
Vehicles with a manual transmission
1. Depress the parking brake pedal.
2. Shift the transmission into NEUTRAL.
All vehicles
3. Position the seats forward and remove the 2 floor console rear bolts.
-
To install, tighten to 7 Nm (62 lb-in).
4. Position the seats rearward.
Vehicles with an automatic transmission
5. Remove the selector lever trim ring.
Vehicles with a manual transmission
6. Disengage the gear shift boot trim ring.
All vehicles
