Escape 4WD L4-2.5L (2010)
8. NOTE: Make sure that the brake flexible hose is not twisted.
Install the brake flexible hose to the brake caliper.
-
Tighten to 20 Nm (177 lb-in).
9. Position the brake flexible and install a new retainer clip.
10. Attach the brake tube fitting to the brake flexible hose.
-
Tighten to 18 Nm (159 lb-in).
11. Bleed the brake caliper. For additional information, refer to Component Bleeding in Brakes and Traction Control.
12. Install the wheel and tire. For additional information, refer to Wheels and Tires.
