Escape 4WD L4-2.5L (2010)
16. Install the engine plug bolt.
-
Tighten to 20 Nm (177 lb-in).
17. Install the accessory drive belt. For additional information, refer to Drive Belts, Mounts, Brackets and Accessories.
18. Install the front RH wheel and tire. For additional information, refer to Wheels and Tires.
19. Install the valve cover. For additional information, refer to Valve Cover See: Service and Repair/Removal and Replacement/Valve Cover.
20. Using the scan tool, perform the Misfire Monitor Neutral Profile Correction procedure, following the on-screen instructions.