ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Removal and Replacement|Page 6525 > < Compressor to Condenser Discharge Line|Page 6520
Page 1
background image

Housing Assembly HVAC: Removal and Replacement

Heater Core And Evaporator Core Housing

Removal and Installation

NOTICE:  Motorcraft(R) Electric Compressor Oil only must be used as a refrigerant system lubricant for hybrid vehicles. Addition of any oil
other than Motorcraft(R) Electric Compressor Oil to the hybrid vehicle refrigerant system will damage the electric Air Conditioning (A/C)
compressor and contaminate the refrigerant system.

NOTE:  If a heater core leak is suspected, the heater core must be leak tested before the heater core is removed.

1. Drain the engine coolant. For additional information, refer to Cooling System &/or Engine Block Heater.

2. Recover the refrigerant.

3. Remove the instrument panel. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

4. Remove the Thermostatic Expansion Valve (TXV) fitting nut and disconnect the fitting.

-

Discard the gasket seals.

Removal and Replacement|Page 6525 > < Compressor to Condenser Discharge Line|Page 6520