Escape 4WD L4-2.5L (2010)
Each termination module has an internal 120 ohm resistor that bridges across the positive and negative bus connection. With two 120 ohm resistors
located in a parallel circuit configuration, the total network impedance, or total resistance, is 60 ohms.
Network termination improves bus message reliability by:
-
stabilizing bus voltage.
-
eliminating electrical interference.
Gateway Module
The Instrument Cluster (IC) is the gateway module, translating messages on the HS-CAN to MS-CAN and vice versa. This allows a message to be
distributed throughout both networks. The IC is the only module on this vehicle that has this ability.
