Escape 4WD L4-2.5L (2010)
If the vehicle is not equipped with a GPSM, GO to V13.
No
CONNECT the negative battery cable. GO to V27.
-------------------------------------------------
V12 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE GPSM DISCONNECTED
-
Disconnect: GPSM C2300 .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.
-
Is the resistance less than 5 ohms?
Yes
GO to V13.
No
CONNECT the negative battery cable. GO to V28.
-------------------------------------------------
V13 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE FDIM DISCONNECTED
-
Disconnect: FDIM C2123 .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.
-
Is the resistance less than 5 ohms?
Yes
If the vehicle is equipped with a Front Controls Interface Module (FCIM), GO to V14.
If the vehicle is not equipped with an FCIM, GO to V15.
No
CONNECT the negative battery cable. GO to V29.
-------------------------------------------------
V14 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE FCIM DISCONNECTED
-
Disconnect: FCIM C2402 .
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.
