ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2761 > < Initial Inspection and Diagnostic Overview|Page 2759
Page 83
background image

-

Is the resistance less than 5 ohms?

Yes

GO to V15. 

No

CONNECT the negative battery cable. GO to V30.

-------------------------------------------------
V15 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE ACM DISCONNECTED

-

Disconnect: ACM C240b .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

If the vehicle is equipped with an APIM, GO to V16. 

If the vehicle is not equipped with an APIM, GO to V17. 

No

CONNECT the negative battery cable. GO to V31.

-------------------------------------------------
V16 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE APIM DISCONNECTED

-

Disconnect: APIM C3338 .

-

Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.

-

Is the resistance less than 5 ohms?

Yes

GO to V17. 

No

CONNECT the negative battery cable. GO to V32.

-------------------------------------------------
V17 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE HVAC MODULE

Initial Inspection and Diagnostic Overview|Page 2761 > < Initial Inspection and Diagnostic Overview|Page 2759