Escape 4WD L4-2.5L (2010)
Evaporator Temperature Sensor / Switch: Service and Repair
Air Conditioning (A/C) Evaporator Discharge Air Temperature Sensor
Removal and Installation
1. Lower the glove compartment.
2. Detach the instrument panel wire harness pin-type retainer and position the wire harness away from the evaporator discharge air temperature
sensor.
3. Disconnect the A/C evaporator discharge air temperature sensor electrical connector.
4. Gently pry upward and remove the A/C evaporator discharge air temperature sensor.
5. To install, reverse the removal procedure.
