Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Front Door Hinge: Adjustments
HINGE ADJUSTMENT - FRONT DOOR
LH and RH sides
NOTE: Make sure the rear door is within specification before making any adjustments to the front door. Refer to the specification chart. See:
Specifications
1. Remove the fender.
2. Mark the positions of the front door hinges to use as reference points.
3. Loosen the two front door hinge-to-body bolts just enough to permit movement.
4. Remove the A-pillar lower trim panel.
1
Remove the pin-type retainer.
2
Remove the A-pillar lower trim panel.
LH side