Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Front Door Panel: Service and Repair
FRONT DOOR TRIM PANEL
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door latch release handle bezel.
1
Remove the screw.
2
Remove the front door latch release handle bezel.
3. Remove the door handle cup screw.
4. Remove the front door trim panel.
1
Remove the screws.
2
Remove the front door trim panel and disconnect the electrical connector.
INSTALLATION
1. To install, reverse the removal procedure.