Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Rear Door Exterior Handle: Service and Repair
EXTERIOR REAR DOOR HANDLE
REMOVAL
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Disconnect the door latch electrical connector.
1
Release the clip.
2
Disconnect the electrical connector.
4. Position the rear door glass top run aside.
1
Remove the bolts.
2
Position the rear door glass top run aside.
5. Disconnect the exterior door handle actuating rod.
1
Open the clip.
2
Disconnect the actuating rod.