Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
28. Connect the passenger air bag module electrical connector.
29. Raise the glove compartment.
-
Press the locking tabs.
30. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from vehicle prior to road use. Failure to
remove may result in personal injury and possible violation of vehicle safety standards.
Remove the special tool from the steering column harness side of the driver air bag module electrical connector.
31. Connect the driver air bag module electrical connector.
32. Install the driver air bag connector access cover.
33. Connect the battery ground cable.
34. Prove out the air bag system.