Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Brake Proportioning/Combination Valve: Service and Repair
Brake Pressure Control Valve
Removal and Installation
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately. Failure to follow these instructions may result in personal injury.
CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.
1. Remove the brake pressure control valve.
1
Disconnect the six brake line fittings and plug the brake lines.
2
Remove the brake pressure control valve bolts
2. To install reverse the removal procedure
^
Bleed the brake system
