Escape 4WD V6-181 3.0L DOHC VIN 1 Duratec (2003)
Electronic Brake Control Module: Service and Repair
Module-Anti-Lock Brake Control
Removal and Installation
1. Disconnect the battery negative cable.
2. Disconnect the electrical connectors.
3. Raise and support the vehicle.
4. Remove the screws and the control module.
5. NOTE: The 4x2 module cannot be interchanged with the 4x4 module. The 4x4 module is interchangeable with the 4x2 module.
To install. reverse the removal procedure.
